Software by Novo Tech Software Ltd.

VisLog is a robust and powerful software, designed for visualizing geotechnical/geological borehole logs and automatically drawing soil profiles. more than 30 soil types are supported and input data can be imported either from SMTP or gINT software.

NovoSPT is a software for analyzing Standard Penetration Test (SPT/ DCPT) blow counts and correlating N with soil engineering properties. Totally more than 215 formulas are implemented into NovoSPT from 50 papers and reference books

NovoSPT is a software for analyzing Standard Penetration Test (SPT/ DCPT) blow counts and correlating N to soil engineering properties. Totally more than 285 formulas are incorporated into NovoSPT database from 70 papers and reference books.

Geotechnical engineers can use this software for day-to-day analysis and calculations. Database of formulas include common correlations such as Cc, Cs, CBR, Es, etc as well as mass-volume relations and formulas.

NovoCPT is designed for processing CPT files and calculating soil parameters such as friction angle, relative density, unit weight, fines content, shear wave velocity, Gmax, clay sensitivity, OCR, undrained shear strength, soil behavior type (SBT)

NovoLiq supports the following field tests for liquefaction assessment:
-Standard Penetration Test (SPT)
-Becker Density Test (BDT)
-Shear Wave Velocity (Vs)
Post-liquefaction lateral displacement and settlements, residual strength Sr

LateralK is a simple software for calculating lateral earth pressure coefficients and forces behind retaining walls in static and earthquake condition based on Rankine/ Coulumb formulae and also Mononobe/ Okabe methods.

LateralK is a simple software for calculating lateral earth pressure coefficients and forces behind retaining walls in static and earthquake condition based on Rankine/ Coulumb formulae and also Mononobe/ Okabe methods.

Becker Penetration Test (BPT) is a field test used for estimation of relative density of coarse-grained material containing cobbles and boulders. NovoBPT is designed for correcting raw BPT blow counts (Nb) and correlating them to SPT blow counts (N60

Peysanj is a series of geotechnical engineering modules such as bearing capacity and settlement, pressure-meter test, plate loading test, soil liquefaction analysis, etc bundled as single software.

This software is used to calculate section properties like area, moment of inertia, radius of gyration, etc for more than 25 sections and shapes. These equations are taken from "Roark's formulas for stress and strain (7th Edition)" book.